A resting distance under 0.10 is normal. Between 0.10 and 0.25 you may notice it in games with a small deadzone. At 0.25 or more, most games will pick it up.
What the number measures
A drift test reports how far a stick rests from the center when you aren't touching it. The scale runs from 0, dead center, to 1, pushed all the way to the edge.
So a reading of 0.10 means the stick sits a tenth of the way toward the edge on its own. You'd barely see that with your eyes, but a game can.
Why no stick is perfectly centered
The springs that pull a stick back, and the sensors that measure it, are never perfectly precise. A brand-new controller usually rests a few hundredths off center, and the reading wobbles a little from moment to moment. That's normal and invisible in games.
The three ranges
| Resting distance | What it means | What to do |
|---|---|---|
| under 0.10 | Normal. Games with a standard deadzone won't notice. | Nothing. Test again in a few weeks if you're curious. |
| 0.10 – 0.25 | Mild drift. Games with a small deadzone may move on their own. | Raise the in-game deadzone a little. Try cleaning. |
| 0.25 and up | Clear drift. Most games will pick it up. | Clean it, then plan for a repair or a warranty claim. |
These are the same limits every test on this site uses. How we measure drift →
When small drift still matters
- Precise aiming. If you lower the deadzone for finer control, even drift under 0.10 can start to show.
- It's growing. A stick that rested at 0.04 last month and 0.08 today is wearing. It usually keeps going.
- It comes and goes. Some sticks only drift right after you've moved them. The drift test's 20-second chart shows this.
Watch the trend, not one number
One reading tells you where a stick is today. A few readings over weeks tell you where it's heading. Copy the share link after each test and keep them in a note, so you can compare.
Is drift on a new controller normal?
A new controller should pass. If a new one warns or fails, test it a couple more times with the controller lying flat. If the result holds, it's worth contacting the seller or the maker while the return window or warranty still applies.