Xbox Controller Tester

Test your Xbox One or Xbox Series controller in the browser: every button, both sticks, LT and RT, the rumble motors and trigger rumble. Connect it with a cable or over Bluetooth, then press any button.

P1
No controller yet Press any button on your controller to start
Waiting for input
Health checkStep 1 of 5
  1. 1Let go
  2. 2Rotate sticks
  3. 3Buttons
  4. 4Triggers
  5. 5Vibration

Healthy Health check complete. See report ↓

Connect a controller and press any button

Plug it in with a USB cable or pair it over Bluetooth. Browsers keep controllers hidden until you press a button, so the tester starts the moment you do.

Xbox · PlayStation · Switch Pro · 8BitDo · most USB gamepads

Not showing up?

Still not detected? Try these in order

  1. Press a face button or move a stick while this tab is in front.
  2. Check the connection. Your system settings should show the controller as connected.
  3. Close Steam, or turn off Steam Input for desktop. It can take over the controller.
  4. Try Chrome or Edge, then reload this page.
  5. On iPhone or iPad, open this page in Safari, not inside another app's browser.
Read the full guide: Controller not detected →

Left stick

Centered
X
+0.000
Y
+0.000
Distance
0.000
Angle
0°
Rings: 0.10 / 0.25 drift limits

Xbox layout detected automatically

LT RT Y B A X
Pressed nowNot pressed

Right stick

Centered
X
+0.000
Y
+0.000
Distance
0.000
Angle
0°
Rings: 0.10 / 0.25 drift limits

Triggers

LT
0.00
RT
0.00

The thin mark shows the furthest each trigger has gone. A healthy trigger reaches 1.00.

Buttons

0 / 17 pressed

Vibration

Waiting
Left motorStrong, low rumble
1.00
Right motorLight, fast buzz
1.00
Duration1.0 s
Trigger rumbleXbox controllers in Chrome and Edge

Not a controller problem. Firefox and iPhone browsers can't vibrate controllers yet. Open this page in Chrome, Edge or Safari on Mac to test the motors.

Report rate browser-visible

—Hz

How often this browser receives new input from the controller. It isn't the controller's own polling rate. Polling rate test →

Raw data axes, buttons, timestamp
Healthy

· Tested ·

CheckMeasured

These results are what your browser receives after your system and drivers process the input, judged against one general set of limits. How we test →

How to connect your Xbox controller

  1. With a USB cable.Xbox Series controllers use USB-C, and Xbox One controllers use micro-USB. Plug it in and press any button. Use a cable that carries data, since some charging-only cables don't.
  2. Over Bluetooth.Hold the small pair button on top of the controller until the Xbox button flashes quickly. Then choose “Xbox Wireless Controller” in your computer's or phone's Bluetooth settings.
  3. With the Xbox Wireless Adapter.On Windows, a controller connected through the adapter shows up here just like a wired one.

The first Xbox One controllers don't have Bluetooth. Controllers from the Xbox One S onward do. If yours won't pair, use a cable or the adapter.

What this test checks on an Xbox controller

Everything a web page can read from the controller, including trigger rumble in Chrome and Edge.

FeatureTestedNotes
A, B, X, Y, bumpers and D-pad✓Every button lights up on the diagram as you press it.
View, Menu and Xbox buttons✓On Windows, the Game Bar may catch the Xbox button before the page sees it.
Left and right sticks✓Live position, drift and circularity.
LT and RT✓Full analog travel, from 0.00 to 1.00.
Rumble motors✓Left and right motors, in Chrome, Edge and Safari on Mac.
Trigger rumble✓The small motors inside LT and RT, in Chrome and Edge.
Share button—Not part of the standard layout. Some browsers report it as an extra button, others don't.
Battery level—Not available to web pages.

Elite Series 2 back paddles show up as whichever buttons they're mapped to.

Common Xbox controller problems

  • A stick driftsThe drift test gives each stick a verdict in 3 seconds and tells you the deadzone that would hide it.Stick drift test →
  • It won't connect over BluetoothCheck that your model has Bluetooth, update the controller's firmware in the Xbox Accessories app, then pair again. A cable is the quickest way to rule out pairing problems.Controller not detected →
  • Trigger rumble does nothingTrigger rumble only works in Chrome and Edge. In other browsers the regular rumble motors may still work.Why vibration isn't working →
  • The Xbox button opens the Game BarWindows can catch the Xbox button. To test it here, turn off “Open Game Bar using this button on a controller” in Windows gaming settings.

Test one thing in depth

FAQ

Does it work with Xbox One controllers?

Yes. Xbox One and Xbox Series controllers share the same layout, so the tester shows them the same way. Wired Xbox 360 controllers usually work on Windows too.

What is trigger rumble?

Xbox One and Series controllers have small motors inside LT and RT, separate from the two main rumble motors. In Chrome and Edge, this tester can buzz each trigger on its own.

Does it work with the Elite Series 2?

Yes. The back paddles don't appear as separate buttons. They show up as whichever buttons you've mapped them to.

Do I need the Xbox Accessories app?

No. You only need it to update the controller's firmware or remap buttons. The tester reads the controller directly.

Can I test an Xbox controller on my phone?

Yes. Pair it over Bluetooth and open this page in Safari or Chrome. Vibration testing isn't available on iPhone.

Is the test safe for my controller?

Yes. It only reads inputs and, when you ask, plays a short vibration. It never changes the controller's settings or firmware.