PS5 Controller Test

Test your DualSense in the browser: every button, both sticks, the L2 and R2 triggers, the touchpad click and vibration. Connect it with a USB-C cable or over Bluetooth, then press any button.

P1
No controller yet Press any button on your controller to start
Waiting for input
Health checkStep 1 of 5
  1. 1Let go
  2. 2Rotate sticks
  3. 3Buttons
  4. 4Triggers
  5. 5Vibration

Healthy Health check complete. See report ↓

Connect a controller and press any button

Plug it in with a USB cable or pair it over Bluetooth. Browsers keep controllers hidden until you press a button, so the tester starts the moment you do.

Xbox · PlayStation · Switch Pro · 8BitDo · most USB gamepads

Not showing up?

Still not detected? Try these in order

  1. Press a face button or move a stick while this tab is in front.
  2. Check the connection. Your system settings should show the controller as connected.
  3. Close Steam, or turn off Steam Input for desktop. It can take over the controller.
  4. Try Chrome or Edge, then reload this page.
  5. On iPhone or iPad, open this page in Safari, not inside another app's browser.
Read the full guide: Controller not detected →

Left stick

Centered
X
+0.000
Y
+0.000
Distance
0.000
Angle
0°
Rings: 0.10 / 0.25 drift limits

Xbox layout detected automatically

LT RT Y B A X
Pressed nowNot pressed

Right stick

Centered
X
+0.000
Y
+0.000
Distance
0.000
Angle
0°
Rings: 0.10 / 0.25 drift limits

Triggers

LT
0.00
RT
0.00

The thin mark shows the furthest each trigger has gone. A healthy trigger reaches 1.00.

Buttons

0 / 17 pressed

Vibration

Waiting
Left motorStrong, low rumble
1.00
Right motorLight, fast buzz
1.00
Duration1.0 s
Trigger rumbleXbox controllers in Chrome and Edge

Not a controller problem. Firefox and iPhone browsers can't vibrate controllers yet. Open this page in Chrome, Edge or Safari on Mac to test the motors.

Report rate browser-visible

—Hz

How often this browser receives new input from the controller. It isn't the controller's own polling rate. Polling rate test →

Raw data axes, buttons, timestamp
Healthy

· Tested ·

CheckMeasured

These results are what your browser receives after your system and drivers process the input, judged against one general set of limits. How we test →

How to connect your DualSense

  1. With a USB-C cable.Plug it in and press any button. This is the most reliable way to test. Use a cable that carries data, since some charging-only cables don't.
  2. Over Bluetooth.Hold the PS button and the Create button together until the light bar flashes. Then choose “DualSense Wireless Controller” in your computer's or phone's Bluetooth settings.
  3. On a PC with Steam open.Steam can take over the controller. Close Steam, or turn off Steam Input for desktop, then reload this page.

What this test checks on a DualSense

Everything a web page can read from the controller. A few DualSense features need deeper access, and we say so rather than guess.

FeatureTestedNotes
Buttons, D-pad, ✕ ○ □ △✓Every button lights up on the diagram as you press it.
Left and right sticks✓Live position, drift and circularity.
L2 and R2✓Full analog travel, from 0.00 to 1.00.
Touchpad click✓Counts as a button. Web pages can't see where you touch.
Vibration✓In Chrome, Edge and Safari on Mac.
Adaptive triggers, light bar, motion sensors, battery—These need a lower-level browser feature that this test doesn't use yet.

PS4 DualShock 4 controllers use the same layout and work the same way here.

Common DualSense problems

  • A stick driftsStick drift is one of the most common DualSense complaints. The drift test gives each stick a verdict in 3 seconds.Stick drift test →
  • It won't connect over BluetoothRemove the controller from your Bluetooth list, then pair it again by holding PS and Create until the light bar flashes. A USB-C cable is the quickest way to rule out pairing problems.Controller not detected →
  • Buttons show up in the wrong places in FirefoxOlder versions of Firefox didn't map the DualSense's buttons correctly. Update Firefox, or use Chrome or Edge.Browser compatibility →
  • Vibration doesn't work hereFirefox and iPhone browsers can't vibrate controllers yet. Try Chrome, Edge or Safari on Mac.Why vibration isn't working →

Test one thing in depth

FAQ

Does this work with PS4 controllers?

Yes. The DualShock 4 has the same layout, so the tester shows it the same way, with the same ✕ ○ □ △ labels.

Can I test the adaptive triggers?

Not yet. The standard gamepad feature that web pages use can't control adaptive triggers. You can still check that L2 and R2 travel their full range.

Why does it say “Create” instead of “Share”?

On the DualSense, Sony renamed the Share button to Create. It's the same button, in the same place.

Do I need DS4Windows or other drivers?

No. Browsers read the DualSense directly over USB or Bluetooth. Tools like DS4Windows or Steam Input can change what the browser sees, so close them if the results look odd.

Can I test a DualSense on my phone?

Yes. Pair it over Bluetooth and open this page in Safari or Chrome. Vibration testing isn't available on iPhone.

Is the test safe for my controller?

Yes. It only reads inputs and, when you ask, plays a short vibration. It never changes the controller's settings or firmware.